Sulzer Statomix MS Series Static Mixers

    Sulzer Mixpac Statomix MS static mixers are used for mchine dispensing adhesives. These machines are often referred to as Meter Mix Dispense systems. MS series nozzles have elements made of polyacetal which can withstand high machine pressures. Shrouds are typically used with these mixers to provide safety during high pressure dispensing, and also to prevent the plastic housing from "expanding" during operation. The shroud attaches the mixer to the machine via a retaining nut that is part of the shroud. MS static mixers can be used with epoxy, polyurethane, silicone, and a variety of other adhesives and sealants, for diverse applications.

    Detailed information for any static mixer can be found on a separate page, by clicking the part number.

    Part Number Shroud* Elements ID (mm) ID (inch) Length (mm) Length (inch)
    MS 05-24T SH 05-24-09 24 5.0 0.20 149 5.9
    MS 05-32T SH 05-32-09 32 5.0 0.20 188 7.4
    MS 06-24T SH 06-24-09 24 6.4 0.25 186 7.3
    MS 06-32T SH 06-32-09 32 6.4 0.25 235 9.2
    MS 06-48T SH 06-48-09 48 6.4 0.25 334 13.2
    MS 06-56D   56 6.4 0.25 378 14.9
    MS 06-56-L SH 06-56-09 56 6.4 0.25 378 14.9
    MS 08-24T SH 08-24-09 24 8.0 0.31 223 8.8
    MS 08-32T SH 08-32-09 32 8.0 0.31 289 11.4
    MS 1012-0832T SH 10-44-09 44 10.0 + 8.0 0.39 + 0.31 409 16.1
    MS 10-18T   18 10.0 0.39 214 8.4
    MS 10-24T SH 10-24-09 24 10.0 0.39 276 10.9
    MS 10-32T SH 10-32-09 32 10.0 0.39 355 14.0
    MS 1312-1032T SH 13-44-14 44 13.0 + 10.0 0.51 + 0.39 499 19.6
    MS 13-12G   12 13.0 0.51 159 6.3
    MS 13-18G   18 12.8 0.50 223 8.8
    MS 13-24T SH 13-24-09 24 13 0.51 293 11.5
    MS 13-24T-02 SH 13-24-09-L 24 13 0.51 350 13.8
    MS 13-32G-01   32 13 0.51 373 14.7
    MS 13-32T SH 13-32-09 32 13 0.51 378 14.88
    MS 13-32T-02 SH 13-32-09-L 32 13 0.51 453 17.83

    * -09 shroud has a 9 thread count / also available as -14 (14 thread count)

    Mixpac MS Static Mixers

    image 020 statomix MS static mixers2

     

     

     
     

    Quick contact/quote form

    Have us contact you about this part and more with this form:
    Invalid Input
    Please type your full name.
    Invalid email address.
    Invalid Input
    Please add products and quantity
    Please leave your message here.

    * = required

    Please publish modules in offcanvas position.