
Sulzer Mixpac MGQ static mixers are used for dispensing adhesives from two part 200, 400, 600 and 1,500 ml plastic cartridges . Available ratios are 1:1 and 2:1. Theses nozzles are attached using a retaining nut that is an integral part of the mixer. MGQ static mixers can be used with epoxy, polyurethane, silicone, and a variety of other adhesives and sealants, for diverse applications.
Detailed information for any static mixer can be found on a separate page, by clicking the part number.
Part Number | Old Part Number | Elements | ID (mm) | ID (inch) | Length (mm) | Length (inch) |
MGQ 08-18T | 18 | 8.70 | 0.34 | 129 | 5.1 | |
MGQ 08-20D | 20 | 8.70 | 0.34 | 142 | 5.6 | |
MGQ 08-20T | 20 | 8.70 | 0.34 | 142 | 5.6 | |
MGQ 08-24D | 24 | 8.70 | 0.34 | 161 | 6.3 | |
MGQ 08-24T | 24 | 8.70 | 0.34 | 161 | 6.3 | |
MGQ 10-10A-2 | 10 | 10.00 | 0.39 | 181 | 7.1 | |
MGQ 10-14A | 14 | 10.70 | 0.42 | 128 | 5.0 | |
MGQ 10-16D | 16 | 10.70 | 0.42 | 260 | 10.2 | |
MGQ 10-16A | 16 | 10.70 | 0.42 | 254 | 10.0 | |
MGQ 10-16A-24 | 16 | 10.70 | 0.42 | 158 | 6.2 | |
MGQ 10-19A | 19 | 10.70 | 0.42 | 254 | 10.0 | |
MGQ 10-19A-24 | 19 | 10.70 | 0.42 | 254 | 10.0 | |
MGQ 10-19D | 19 | 10.70 | 0.42 | 158 | 6.2 | |
MGQ 10-24D | 24 | 10.70 | 0.42 | 187 | 7.4 | |
MGQ 14-20A | 20 | 14.00 | 0.55 | 238 | 9.4 |
Cartridge* | Volume (ml) | Ratio | Dispensing Gun** | Type | Brand |
AC 200-01-10-01 | 200 | 1:1 | DM 200-01 | Manual | Mixpac |
DP 200-70-01 | Pneumatic | Mixpac | |||
A100LP/1 | Pneumatic | COX | |||
AC 200-02-10-01 | 200 | 2:1 | DM 200-01 | Manual | Mixpac |
DP 200-70-01 | Pneumatic | Mixpac | |||
A200LPMR | Pneumatic | COX | |||
AC 400-01-10-01 | 400 | 1:1 | DM 400-01 | Manual | Mixpac |
DP 400-85-01 | Pneumatic | Mixpac | |||
A400LP/1:2 | Pneumatic | COX | |||
AC 400-02-10-01 | 400 | 2:1 | DM 400-01 | Manual | Mixpac |
DP 400-85-01 | Pneumatic | Mixpac | |||
A400LP/1:2 | Pneumatic | COX | |||
AC 600-01-10-01 | 600 | 1:1 | M300LV/1 | Manual | COX |
A300LP/1 | Pneumatic | COX | |||
AJ 150-01-10-01 | 1500 | 1:1 |
* These are typical cartridges for a given volume and ratio. Many others are available
** These are typical dispensing guns for a given volume and ratio. Many others are available
Brandywine Materials
308 East School Street
Woonsocket, RI 02895
Phone: 401-526-9856
Fax: 401-386-2440
admin@brandywinematerials.com