Nordson Series 120 Disposable Plastic Mixing Elements
Nordson series120 static mixer elements are made from Polyplas which is TAH’s trademarked polyacetal resin. The spiral elements have an “Apple Core” cross section and are made in one injection molding operation. This ensures low unit cost and product consistency. The geometry optimizes flow rate and is able to be flushed clean with less solvent. These elements are also available in a polypropylene version.
Series 120 Disposable Plastic Mixing Elements
| Nordson Part # | Old # | Elements | ID inch | ID mm | Length inch | Length cm |
| Nordson 7700467 | TAH 121-09-08P | 8 | 0.09 | 2.4 | 0.77 | 2.0 |
| Nordson 7700465 | TAH 121-09-012 | 12 | 0.09 | 2.4 | 1.16 | 3.0 |
| Nordson 7700459 | TAH 121-012 | 12 | 0.12 | 3.2 | 1.30 | 3.3 |
| Nordson 7700469 | TAH 121-114 | 14 | 0.19 | 4.8 | 2.23 | 5.7 |
| Nordson 7700470 | TAH 121-116 | 16 | 0.19 | 4.8 | 2.56 | 6.5 |
| Nordson 7704166 | TAH 121-21-007P | 7 | 0.21 | 5.4 | 1.48 | 3.8 |
| Nordson 7700478 | TAH 121-21-021 | 21 | 0.21 | 5.4 | 4.45 | 11.3 |
| Nordson 7700475 | TAH 121-208P | 8 | 0.25 | 6.3 | 2.00 | 5.1 |
| Nordson 7700480 | TAH 121-212P | 12 | 0.25 | 6.3 | 3.00 | 7.6 |
| Nordson 7700481 | TAH 121-216 | 16 | 0.25 | 6.3 | 3.96 | 10.1 |
| Nordson 7700486 | TAH 121-220C | 20 | 0.25 | 6.3 | 5.00 | 12.7 |
| Nordson 7700489 | TAH 121-224 | 24 | 0.25 | 6.3 | 5.94 | 15.1 |
| Nordson 7700507 | TAH 121-32-012 | 12 | 0.31 | 8.0 | 3.67 | 9.3 |
| Nordson 7700498 | TAH 121-306 | 6 | 0.37 | 9.4 | 2.00 | 5.1 |
| Nordson 7700500 | TAH 121-312 | 12 | 0.37 | 9.4 | 3.90 | 9.9 |
| Nordson 7700509 | TAH 121-324 | 24 | 0.37 | 9.3 | 7.83 | 19.9 |
| Nordson 7700515 | TAH 121-412 | 12 | 0.50 | 12.6 | 5.00 | 12.7 |
| Nordson 7700519 | TAH 121-418 | 18 | 0.50 | 12.6 | 7.47 | 19.0 |
| Nordson 7700523 | TAH 121-510 | 10 | 0.63 | 16.0 | 5.42 | 13.8 |
| Nordson 7700526 | TAH 121-608 | 8 | 0.78 | 19.9 | 5.37 | 13.6 |
| Nordson 7700528 | TAH 121-804 | 4 | 1.02 | 26.0 | 5.90 | 15.0 |
Nordson static mixer elements are used for mixing epoxy, silicone, acrylic, methacrylate, polyurethane, polysulfide and other adhesives as well as sealants and coatings. The end user can design many types of static mixers using these elements which are available without the typical housing. Typical applications for dispensing adhesive with Nordson static mixers include: electronics, communications, aerospace, automotive, aircraft assembly, wind turbine assembly and repair, home building, construction, concrete repair and many others.
Quick contact/quote form
Brandywine Materials
308 East School Street
Woonsocket, RI 02895
Phone: 401-526-9856
Fax: 401-386-2440
admin@brandywinematerials.com
- Static Mixers
– Sulzer Mixpac, Quadro and Statomix
– Nordson In-Line and Disposable Plastic
- Cartridges – Sulzer Mixpac and Sulzer Quadro Plastic Two-Component, Side-by-Side
- Dispensers – Mixpac, MK and COX Manual, Pneumatic and Battery Dispensers and Applicators
- Cartridges & Syringes – Nordson, for One and Two-Component Adhesives
- Dispensing Systems – Sulzer Mixpac Adhesive
- Adhesives – for Industrial Applications
